Setting The Clock; Battery Backup - Naxa NRC-190 Manual De Operación

Connecting the Unit to
Power
Before plugging in the AC/DC power adapter to the
outlet, make sure that the voltage of your electric-
ity supp ly is same as that indicated on the rating
plate or power adapter.
The provided power adapter works
with AC 100-240V,50/60Hz Power.

Battery backup

Battery backup will preserve the current time, alarm
settings in the case of power failure or interrupt-
ed AC p ower.
Insert (2) two UM-4 batteries (AAA) into the battery
compartment. Be sure to observe the prope r po-
battery compartment.
Page 6

Setting the Clock

Connect the AC power adapter to a wall
1.
outlet. The LED Display will illuminate
Press the SET/MEM button, the hour digit
2.
to set the hour.
Press the SET/MEM button twice, the minute
repeatedly to set the minutes.
12-Hour / 24-Hour Mode
4.
Press the SET/MEM button 3 times, "12H" or
"24H" will display. Press the
repeatedly to set the 12 or 24 hour format.
Take note of the PM LED indi cator
when setting the time.
5. Press the SET/MEM button repeatedly until
the actual time appears on the display to
exit.
or buttons
Naxa Electronics