Naxa NRC-190 Manual De Operación página 8

Wake up Mode:
Buzz
Radio
AUX
4.
After alarm has been set, wait a few seconds.
The unit will save the setings and exit while
going back to displaying the current time.
buttons repeatedly to set the minute.
SNOOZE:
Press the SNOOZE button when the alarm is sounding
to stop the alarm and have it sound again automatically
at your designated Snooze setting.
Press the SET/MEM button 4 times to set Snooze
interval between 5 - 60 mins. Press the
buttons to adjust and set Snooze internval.
Turning OFF the Alarm
Press the ALARM/SLEEP button to shut o the
alarm and alarm will reset for the next day.
To disable the alarm completely:
Page 8
Display or Indicators
"ON" will appear on the display and AL 2
indicator light will illuminate
"FM" and AL 2 indicators will illuminate
"AUX" and AL 2 indicators will illuminate
Alarm 1: Press the ALARM/SLEEP button 3 times,
the Alarm 1 status will display. Press the
buttons repeatedly until "OFF" is displayed. Wait a
few seconds to save the settings.
Alarm 2: Press the ALARM/SLEEP button 6 times,
the Alarm 2 status will display. Press the
buttons repeatedly until "OFF" is displayed. Wait a
few seconds to save the settings.
How to Set the SLEEP TIMER
In Radio or AUX playback mode, press and hold the
ALARM/SLEEP button until the sleep timer appears
on the display to activate the sleep function. The SL
indicator on the display will illuminate. Press the
or
ALARM/SLEEP button repeatedly to set the sleep
timer from 05 - 90 minutes.
To turn o the sleep timer before time is up, press
and hold the
DIMMER:
Press the SNOOZE/DIMMER button repeatedly to set
the brightness level of the display.
/MODE button to shut o .
or
or
Naxa Electronics