Setting The Alarms - Naxa NRC-190 Manual De Operación

Setting the Alarms

With the unit in Clock mode:
1.
Press the ALARM/SLEEP button once, the
AL 1 (Alarm 1) indicator will illuminate on
the screen and the hour digit will ash.
Press the or
the hour.
Press the ALARM/SLEEP button again, the
2.
minute digit will ash. Press the
buttons repeatedly to set the minute.
3.
Press the ALARM/SLEEP button again, the
Alarm 1 status will appear on the display.
Press the or
activate alarm, turn o alarm, and set wake
up mode as illustrated below.
Wake up Mode:
Buzz
Radio
AUX
www.naxa.com
buttons repeatedly to set
or
buttons repeatedly to
Display or Indicators
"ON" will appear on the display and AL 1
indicator light will illuminate
"FM" and AL 1 indicators will illuminate
"AUX" and AL 1 indicators will illuminate
4.
After alarm has been set, wait a few seconds.
The unit will save the setings and exit while
going back to displaying the current time.
Alarm 2 Settings:
With the unit in Clock mode:
1.
Press the ALARM/SLEEP button 4 times, the
AL 2 (Alarm 2) indicator will illuminate on
the screen. Alarm 2 time will appear on
the display and the hour digit will ash.
Press the or
the hour.
Press the ALARM/SLEEP button again, the
2.
minute digit will ash. Press the
buttons repeatedly to set the minute.
3.
Press the ALARM/SLEEP button again, the
Alarm 3 status will appear on the display.
Press the or
activate alarm, turn o alarm, and set wake
up mode as illustrated below.
buttons repeatedly to set
or
buttons repeatedly to
Page 7