Publicidad
Idiomas disponibles
Idiomas disponibles
CENTER SECTION BOLTS
(Location varies per vehicle)
RECEIVER TUBE
1. Loosely install Side Brackets on vehicle per specific instructions.
Align holes in side plate with side bracket as shown.
2. Install the 1/2" Knurl neck bolts, 1/2 lock washers, and 1/2 hex nuts.
3. First - Tighten Knurl neck bolts to 90 FT-LB to seat bolt, then loosen and
retighten to 75 FT-LB
4. Second - Tighten Side Bracket fasteners to proper specifications.
(Refer to general instructions on Page 1. for specs. )
5. Center receiver tube on vehicle and tighten center section fasteners to 75 LB-FT.
SIDE BRACKET
CENTER SECTION BOLTS
(Location varies per vehicle)
RECEIVER TUBE
1. Loosely install Side Brackets on vehicle per specific instructions.
Align holes in side plate with side bracket as shown.
2. Install the 1/2" Knurl neck bolts, 1/2 lock washers, and 1/2 hex nuts.
3. First - Tighten Knurl neck bolts to 90 FT-LB to seat bolt, then loosen and
retighten to 75 FT-LB
4. Second - Tighten Side Bracket fasteners to proper specifications.
(Refer to general instructions on Page 1. for specs. )
5. Center receiver tube on vehicle and tighten center section fasteners to 75 LB-FT.
BRACKET LOCATIONS
1/2" KNURL NECK BOLT
1/2 LOCK WASHER
SIDE BRACKET LOCATION 1.
1/2" KNURL NECK BOLT
1/2 LOCK WASHER
SIDE BRACKET LOCATION 2.
SIDE BRACKET
1/2 HEX NUT
1/2 HEX NUT
TOOLS REQUIRED
3/4"(19MM) SOCKET
SAFETY GLASSES
TORQUE WRENCH
SIDE PLATE
SIDE PLATE
5
Publicidad
