Assembly; Adding Oil; Adding Fuel - Craftsman CMXGAAM1085128 Manual De Instructiones

Contents
• Leaf Blower
• Upper Handle
• Star Knob (2)
• Carriage Screw (2)
• 90° Discharge Chute Attachment
• Oil
• Safety Glasses
• Operator's Manual
• Engine Operator's Manual
NOTE: All references to the left or right side of the jet sweep blower are from the
operator's position. Any exceptions will be noted.

Assembly

Attaching the Upper Handle
1. Remove the carriage screws (a) and star knobs (b) from the carton. See
Figure 1.
a
b
Figure 1
ASSEMBLY
2. Place the upper handle over the lower handle, aligning the upper holes/
metal tabs in the upper handle with the upper holes/lower holes in the
lower handle. Secure the upper handle to the lower handle with the carriage
screws (a) and star knobs (b). See Figure 2.
Set-Up

Adding Oil

Refer to the Engine Operator's Manual for information on adding and checking oil.
Always check the engine oil level before each use as instructed in the
Engine Operator's Manual. Add oil as necessary. Failure to do so may result
in serious damage to your engine.

Adding Fuel

Refer to the Engine Operator's Manual for information on adding fuel.
Use extreme care when handling gasoline. Gasoline is extremely
flammable and the vapors are explosive. Never fuel the machine indoors
or while the engine is hot or running. Extinguish cigarettes, cigars, pipes
and other sources of ignition.
6
Figure 2
CAUTION
WARNING