STERWINS ETHT2-50.3 Manual De Instrucciones página 216

2. SAFETY INSTRUCTIONS
be caught in moving parts. Use of sturdy gloves, non-skid footwear and
safety glasses is recommended.
6. If the cutting mechanism strikes any foreign object or the hedge
trimmer starts making any unusual noise or vibration, shut off the power
source and allow the hedge trimmer to stop. Disconnect the supply cord
from main and take the following steps:
--inspect for damage;
--check for, and tighten, any loose parts;
--have any damaged parts replaced or repaired with parts having
equivalent specifications
Operation
1. This product shall not be used for any other purpose as described
within these instructions. Follow all given instructions closely.
2. Stop the product and disconnect the supply cord from the power
supply before
•cleaning or when clearing a blockage,
•checking, carrying out maintenance or working on the product,
•adjusting the working position of the cutting device,
•leaving the product unattended.
3. Ensure that the product is correctly located in a designated working
position before starting the product. Do not use this product on steps
or a ladder.
4. While operating the product, always ensure that the operating position
is safe and secure.
5. Do not operate the product with a damaged or excessively worn
cutting device.
6. Always ensure that all handles and guards are fitted when using the
product. Never attempt to use an incomplete product or one fitted
with an unauthorized modification.
EN
216