Technical Specifications - STERWINS ETHT2-50.3 Manual De Instrucciones

4.TECHNICAL SPECIFICATIONS

Model
Rated voltage, frequency
Rated input power
Rated no-load speed
Max. cutting length
Blade gap
Protection class
Angle adjustment of blade head
Weight approx
Sound pressure level LpA
Uncertainty KpA
Measured sound power level LWA
Uncertainty K
Guaranteed sound power level LWA
Front handle (gripping surface) a h
Rear handlea h
Uncertainty K
The sound values have been determined according to noise test code given in EN ISO 10517,
using the basic standards EN ISO 11094 and EN ISO 3744.
The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures
is necessary.
The declared vibration value has been measured in accordance with a standard test method
(according to EN 60745) and may be used for comparing one product with another. The
declared vibration value may also be used in a preliminary assessment of exposure.
exposure in the actual conditions of use (taking account of all parts of the operating cycle
such as the times when the tool is switched off and when it is running idle in addition to
the trigger time). Depending on the actual use of the product the vibration values can
differ from the declared total! Adopt proper measures to protect yourself against vibration
exposures! Take the whole work process including times the product is running under no
load or switched off into consideration! Proper measures include among others regular
maintenance and care of the product and application tools, keeping hands warm, periodical
breaks and proper planning of work processes!
EN
The vibration emission value during actual use of the tool can differ
WARNING!
from the declared value depending on the ways in which the tool is used. Identify
safety measures to protect the operator that are based on an estimation of
ETHT2-50.3
220-240V~50HZ
500W
3300/min
384mm
22mm
Class II
-90°/-60° / -30° / 0° / 30° / 60°
4.2 kg
90.30dB(A)
2.5 dB(A)
98dB(A)
1.5m/s
2
100dB(A)
1.692m/s
2
1.5m/s
2
1.5m/s
2
222