HYGIPLAS CB891 Manual De Instrucciones página 2

CB891_ML_90x130mm_v4_20210507.indb 2 CB891_ML_90x130mm_v4_20210507.indb 2
EN
FEATURES
• Easy installation
• Large and clear digital display
• Out of safety zone alert
• Temperature unit selectable
• Low battery indication
• Low power consumption
SPECIFICATION
Temperature Range
Display Accuracy
Display Resolution
Display Reading Update
Safety Zone Range
Battery
Product Dimensions
OPERATION
Installation
1. Unpack the thermometer with care.
2. Press [RESET] button once.
3. Peel off display protective sheet.
4. Hang the thermometer onto the shelf inside the fridge or pull down the
hanger to put the thermometer on the shelf.
5. If the temperature is out of the safety zone of 0°C to 8°C (32°F to 46.4°F),
then the * symbol will be flashing to indicate the temperature inside the
fridge needs to be adjusted.
Select Temperature Unit
1. Unscrew and open the back cover.
2. Slide the °C/°F switch to the desired temperature unit.
3. Put back the back cover and tighten the screws.
2
-25°C to 50°C / -13°F to 122°F
±1°C / ±1.8°F over a full range
0.1° over a full range
10 seconds
0°C to 8°C / 32°F to 46.4°F
3 volt lithium, type CR2032 or equivalent, 1 piece
42 (H) x 71 (W) x 18 (D) mm
2021/5/7 09:17 2021/5/7 09:17