Controls And Display - SEVERIN CRD 8996 Instrucciones De Uso

Controls and Display

The control is carried out by push buttons
under the display on the outside of the cold
storage door. If the refrigerator doors are
closed and no button is touched within 3
minutes, the display illumination turns off.
• The inverter symbol always lights up as
long as the compressor is operating.
• Key lock
The device is equipped with an automat-
ic key lock. To change the settings, first
press the button
changes are made to the display for three
minutes, the key lock is reactivated.
1
3
4
6
8
9
11
13
1 Display for Temperature zone Fridge
2 Temperature zone Transit-
Boxes
3 Temperature zone Freezer
4 Temperature
5 Inverter
6 FastCooling mode
7 FastFreeze mode
8 Vacation mode
9 Smart mode (Energy
Saving)
10 Key lock
11 Button for Temperature zone
selection
12 Temperature
13 Function
14 OK / Key lock
for three seconds. If no
5
2 ?
7
10
12
14
ZeroBox
The ZeroBox serves as the optimal storage for
meat and fish.
VeggiBox
The VeggiBox serves as the optimal storage
for fruits and vegetables.
TransitZone
The „TransitZone" boxes can be used either as
a cooling compartment, as a 0° compartment
or as a freezer compartment.
Set the temperature in the „TransitZone" boxes
Press the „TempZone" button. When the
display for the „TransitZone" boxes flashes,
every tap on „Temp" changes the temperature
by one degree between –18°C and 5°C. Tap
on 5°C once more during configuration, ‚OF'
lights up and the cooling for this piece of
equipment is switched off.
Regulate the Temperature in the Cooling Room
Tap the button 'TempZone'. If the display for
the cooling temperature blinks, then every
tap on 'Temp' changes the temperature by
one degree between 2 °C and 8 °C. If you
tap again at the setting of 8 °C, then 'OF'
illuminates and the cooling for this part of the
appliance is turned off.
Regulate the Temperature in the Freezer
Tap on the button 'TempZone'. If the display
for the freezer temperature blinks, then every
tap on 'Temp' changes the temperature by
one degree between –24 °C and –16 °C.
Special Features
Tap if necessary several times on 'Function'
and subsequently on 'OK', in order to activate
the following special features. To deactivate a
special feature, tap the 'Function' button until
the symbol of the desired function gets illu-
minated. Then, hit 'OK'. The symbol lighting
goes out.
Fast Cooling
This setting fixes the cold store temperature
at 2°C. This temperature can no longer be
changed until the function is disabled.
Fast Freezing
This setting fixes the freezer temperature for
26 hours at –32 °C. This function can only
be selected for the freezer boxes on the right
side of the device. This temperature cannot be
changed until the function is deactivated. After
26 hours, the appliance will freeze again at
the preset temperature.
- 23 -