Handlebar Size Adjustment; Starting And Stopping The Brush Cutter; Head Tilt Adjustment; Maintenance And Cleaning Instructions - VITO GARDEN VIBCACSFL20 Manual De Instrucciones

▪ Never put the brush cutter down before the blades
have completely stopped;
▪ Disconnect the brush cutter immediately if any of the
following problems occur:
- Leakage of lubricant through vent holes;
- Damage to the brush cutter housing;
- Damage to the "ON/OFF" switch;
- Appearance of smoke or characteristic burning smell;

Handlebar size adjustment

The brush cutter is equipped with an adjustable
handlebar, which allows the adjustment to the desired
work.

Starting and stopping the brush cutter

1. Press the safety button (1) and the "ON/OFF" switch
(2) at the same time;
2. To increase and decrease the speed, press or release
the "ON/OFF" switch. The maximum speed is reached
with the switch fully pressed;
3. To turn off the brush cutter, release the "ON/OFF"
switch;

Head tilt adjustment

The rotary head adjustment button (10), is used to
adjust the inclination of the head, according to the work
to be done, or the terrain;
The rotary head (11), is used to adjust/rotate the head
90° to the right or left.

MAINTENANCE AND CLEANING INSTRUCTIONS

Remove the battery from the brush cutter before
performing any checking, maintenance or cleaning
work.
The brush cutter does not require any additional
lubrication or maintenance. However, regular cleaning
should be carried out to ensure continuous, trouble-
free operation.
22

Cleaning and storage

Cleaning
After each use, clean all components of the brush
cutter. Clean the brush cutter with a clean, moist cloth
or blow with low pressure compressed air. Careful
handling protects the power tool and extends its service
life.
The tool and its ventilation openings must be kept clean.
Clean the ventilation openings regularly or whenever
they become blocked.
Storage
When not in use, store the brush cutter in a dry, clean
place, free of corrosive smoke and out of the reach of
children. Remove the battery when storing the brush
cutter.

ENVIRONMENTAL POLICY

The packaging has been manufactured using
recyclable materials, which you can dispose of at
your local recycling collection points.
Never dispose of electric machinery in your
household waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, used power tools must
be collected separately and returned to the collection
points provided for that purpose.
You can get information regarding the disposal of used
brush cutters from your local recycling authority.

CUSTOMER SUPPORT

Tel.: +351 256 248 826
E-mail: international@centrallobao.pt
Site: www.centrallobao.pt