Mopar 82215862 Manual Del Usario página 3

RAM BOX BED COVER INSTALL
3.0 COVER LATCHING at the
FRONT/CAB END.
3.1 Swing the cab clamps (1)
down from the stowed
position and slide
them toward the
truck bed rail.
Swing the clamps
so the clamp jaw
is under the rail
extrusion.
Do Not use a wrench or
3.2
over-tighten.
Hand tighten until the clamp
jaw contacts the rail
extrusion, then tighten an
additional two turns.
Securely tighten both sides.
February 14, 2019
www.mopar.com
1
3
1
K6862995