MoJack HDL 45501 Instrucciones De Ensamblaje Y De Manejo página 4

ASSEMBLY AND OPERATING INSTRUCTIONS
STEP 1
Remove lift from package.
Inventory items to be certain all
parts and hardware are present.
If you have any questions regarding
assembly, please call Customer
Service at 1-877-575-3173.
Identify the Right and Left Wheel Pads.
IMPORTANT: The Wheel Pads are
side specific.
STEP 2
Slide the wheel pads into the T-Bar.
Line up the wheel pads to the front tires
of the mower.
The multiple holes allow for adequate
adjustment to fit the front tires of the
mowers.
NOTE: Inside to outside wheel pad
expansion is 18.5" – 47.5"
6 | MoJack HDL Mower Lift
Push Pin
Secure the wheel pads to the T-Bar with the Push Pins.
Make sure the Push Pins are securely inserted into the holes.
NOTE: Wheel pads must be equal distance from the T-Bar to
maintain proper balance.
ASSEMBLY AND OPERATING INSTRUCTIONS
STEP 3
Attach the Safety Straps to the wheel pads.
Insert the strap loop through the metal loop on the front of the wheel pad.
Thread strap hook and buckle through the strap loop and pull until tight.
Repeat with the other Safety Strap and wheel pad.
STEP 4
Move the mower onto the Wheel Pads.
Wheel Pads must be properly aligned with
the mower's front tires (see Step 2) and
secured with Push Pins.
NOTE: Wheel pads will accommodate
10" -17" tire sizes.
Jack MUST be on a hard solid level surface.
MoJack HDL Mower Lift | 7