Denios GS 305 Manual Del Usuario página 16

Model GS 305-with base
For parts Pos. 1 - 47 see the above parts list GS 305
Addiotnal parts for GS 305-with a base:
Pos. Description
50 Galv. grid1460X1180 MA 40X30 TS 30/2
51 Grid supports
52 Location bars
Galv. Sunken head screws DIN 7991 8.8 M 12 X 30
53
To secure the centre support in place
Galv. Hexagonal screws ISO 4017 8.8 M 12 X 40
54
To secure the sides to the location bars
Galv. washers ISO7089/7090 D= 13
55
To secure the sides to the location bars
Galv. spring washer DIN 127-A D= 12, To secure the centre support in place
56
and to secure the sides to the location bars
Galv. Hexagonal nuts ISO 4032-8 M 12, To secure the centre support in
57
place and to secure the sides to the location bars
6. Specifications
See type label.
7. Operation
After opening the doors the gas cylinders can be placed in the pressurised gas cylinder cabinet using suitable
equipment.
Secure gas cylinders to prevent them falling over, always secure individual cylinders with safety
chain!
Naked flame, naked light and smoking prohibited!
Decanting gas cylinders in the pressurised gas cylinder cabinet is prohibited!
Entering the gas cylinder cabinet is prohibited
8. Maintenance and servicing
The inspection and maintenance must be carried out in accordance with the instructions of the general
operating instructions enclosed in the annex.
Doors and collecting sump must be inspected at regular intervals for good condition.
Check the firm hold of the screwed connections.
Grease the locks and hinges with commercial grease where necessary.
Check the liquefied gas cylinder cabinet, particularly the holding brackets and securing chains for
durability and corrosion.
When replacing parts only the manufacturer's original parts may be used!
Maximum charge of snow: 0,75 kN/m². Please vacate the snow in case of overstepping
Gasflaschenschrank GS 305-B / GS 305
115861 / 11586
Seite 16 von 28 Seiten
Prode. Quantity
code
101186 2
107230 5
113217 2
103289 2
103164 4
103407 4
103476 6
103371 6
Ausgabe 06/2007