Canon iR C3580 Guía De Usuario página 54

● If login authentication by a login service (SDL
or SSO) is set:
❑
The Start Up screen is displayed until the machine is
ready to scan.
1
❑
After the Start Up screen disappears, the MEAP
Start Up screen is displayed regardless of the Set as
Initial Function settings.
IMPORTANT
• If you turn OFF the main power, wait at least 10 seconds
before turning the main power back ON.
• Do not turn the main power OFF if you want to send or
receive I-fax documents. Also, do not turn the main
power OFF, if the optional Super G3 FAX Board is
installed, and you want to be able to send or receive fax
documents. Sending or receiving I-fax or fax documents
cannot be done when the power is turned OFF.
• If SSO or SDL is set as the login service, the machine
will take longer to become ready to scan.
5
If you are using a login service, log in using the procedure for the login
service you are using.
1-24
Main Power and Control Panel Power