Wire Feeder Quad Cw 02 - Sol Welding QUAD Serie Manual De Instrucciones

Instruction Manual
6.
COMMANDS DESCRIPTION
58
Fig. 4
57
56
64
63
62
GB
10

WIRE FEEDER QUAD CW 02

Pos. 51 =
51
Pos. 52 =
Pos. 53 =
52
Pos. 54 =
53
Pos. 55 =
Pos. 56 =
54
Pos. 57 =
Pos. 58 =
55
Pos. 59 =
59 Pos. 60 =
Pos. 61 =
Pos. 62 =
Pos. 63 =
Pos. 64 =
60
(*) It's possible to increase or reduce the wire speed of ± 25 % from
61
the set speed of the synergy of the program
QUAD AC/DC SERIES
(Cold Wire Feeder)
Inch wire push-button
Regulation Knob for a limited range of the cold
wire speed.(*)
Quick release connection for the output of the cold wire.
Cold wire liner beak support.
Ceramic nozzle.
Pressure clips for securing the cold wire liner to
the TIG torch.
External cold wire liner sleeve.
Switch for forwarding or rewinding the wire on the spool.
Wire spool support.
Auxiliary cable to the generator.
Wire guiding fitting.
Upper rolls for the feeding of the wire.
Upper rolls support levers.
Securing and pressure knob in order to give the correct
pressure to the wire.
.