JVC XM-R700SL Manual De Instrucciones página 9

Adjusting Tone in MANUAL Sound Mode
You can adjust the tone by changing the bass and treble.
1 Press the A.C.BASS button on the remote control until "MANUAL" appears on the dis-
play.
The indicator lights up on the remote control's display. (If the
step.)
2 Press the A.C.BASS button for 2 seconds or more.
The following tone level meter appears on the remote control's display.
(For 2 seconds)
A.C.BASS button
¢
: Press to select Treble.
4
: Press to select Bass.
To change the bass level, press the 4 button. The bass level bar blinks. Then, press
3
the VOLUME + or – button to move the bass level bar up or down ( in 3 steps each).
To change the treble level, repeat above step 3 except for pressing the ¢ button.
4
To exit MANUAL sound mode:
• Wait until the display automatically returns to the original one.
• When no level bar is blinking, press a button other than the 4 and ¢ buttons on the remote control.
• When the level bar is blinking, press the A.C.BASS or 7 button on the remote control.
Notes
• If you leave the unit for 8 seconds in step 2, the display returns to the original one. In this case, repeat from the
step 2.
• If you leave the unit for 16 seconds in step 3 or 4, the display returns to the original one. In this case, repeat from
the step 2.
• The tone levels set here is stored in memory.
VOLUME +/– : Press to adjust the level.
indicator is already lit, you can skip this
Bass level bar
Fixed bars (flat level)
Treble level bar
6