Safety Information - Zenith 35602SSTMP Manual Del Usuario

HARDWARE CONTENTS (Shown to size)
Small Allen Wrench
Qty. 1

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-800-892-3986, 8 a.m. - 5 p.m. EST, Monday - Friday.
WARNING
Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumbing
and gas lines. Cutting any of these may cause serious injury. If needed, contact your electrician,
plumber or service person.
PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes (with recommended two-person installation)
Tools Required for Assembly (not included): Drill, Phillips Screwdriver, Hammer and Level
NOTE: Use a 9/32 in. drill bit for drywall anchor installation. Use a 5/32 in. drill bit for direct stud
installation. If installing into a material other than drywall or into stud, consult a professional for
proper installation.
HH
4
II
Set Screw
Qty. 4
IS35611