Zenith 35602SSTMP Manual Del Usuario página 8

7. Fasten the 7/8 in. mounting bracket (D) to
7
the wall, using 2 mounting screws (DD).
D
facing
Hardware Used
toward
outside
DD
of tub
Mounting Screws x 2
DD
8.
Insert 1 in. tube plug (G) into 1 in. diameter
8
tube (B).
CC
NOTE: Be sure to line up the 1 in. tube
plug (G) with the holes in the 1 in. diameter
tube.
Repeat this step using the 7/8 in. tube
B
plug (F) and 7/8 in. diameter tube (A).
IMPORTANT: This step may be easier if
you insert a threaded sleeve (CC) through
the holes (only to be used as a guide)
before pushing the tube plug into place.
After inserting the tube plug, be sure to
G
remove the threaded sleeve (CC).
Hardware Used
x 2
Threaded Sleeves
CC
IS35611
8