Prepare The Opening - Simplicity SER241WC Guía De Utilización Y Cuidado Para El Propietario

PREPARE TO INSTALL THE RANGE
TOOLS YOU WILL NEED
Drill with 1/8" bit
Adjustable Wrench
Pliers
(1) REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure to remove packaging materials could result in
damage to the appliance.

(2) PREPARE THE OPENING

• Allow 2" spacing from the range to adjacent vertical walls above the cooktop surface. Allow 30" minimum clearance
between the surface elements and the bottom of unprotected wood or metal top cabinets, and 15" minimum between
the countertop and the adjacent cabinet bottom.
• To eliminate the risk of burns or fi re when reaching over hot surface elements, cabinet storage space above the
cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by
installing a range hood that protrudes at least 5" beyond the front of the cabinets. Cabinets installed above a cooktop
may be no deeper than 13".
2"
36" max.
Wall Mounted
Wall
Outlet box
2¼"
Floor
Recommended acceptable electrical outlet area.
Orient the electrical receptacle so the length is
parallel to the floor.
INSTALLATION INSTRUCTIONS
Safety Glasses
Tape Measure
Pencil
B
13"
30" min.
max.
15" min.
A
5" 2½"
40½"
height
Surface
mount
outlet
D
(Depth
with door
open)
Cord
1/4" Nut Driver
Phillips Screwdriver
PARTS INCLUDED
From
combustible
walls above
cooking surface
C Flooring under the range
either side
• Your range, like many other household
items, is heavy and can settle into soft
fl oor coverings such as cushioned vinyl or
36"
carpeting.
• When moving the range on this type of fl ooring,
it should be installed on a 1/4" thick sheet of
plywood (or similar material) as follows:
• When the fl oor covering ends at the front of the
range, the area that the range will rest on should
be built up with plywood to the same level or
higher than the fl oor covering. This will allow the
range to be moved for cleaning or servicing.
Model
20" Wide
24" Wide
18
Level
Flat-blade Screwdriver
Anti-Tip Bracket Kit
A B C
20" 21" 2"
24" 25" 2"
D
41"
41"