Adjusting The Sound - Philips EXPANIUM AZ 4000 Manual Del Usuario

Adjusting the Sound

Volume
Turn the SOUND CONTROL
CENTRE/ VOLUME control clockwise
to increase or anti-clockwise to decrease
volume on the set (or press VOLUME 3
or 4 on the remote control).
Display shows the volume level
indication,
0-32.
Bass & treble frequencies
To adjust the bass and treble frequency
levels, on the set press the BASS/
TREBLE button once or more until the
desired option is displayed.While the
BASS/ TREBLE option is shown, turn the
SOUND CONTROL CENTRE/
VOLUME control to increase or decrease
(-5 to + 5 steps maximum) the desired
tone.
and a number from
Adjusting the sound
ULTRABASS
This is another bass sound option. Press
ULTRABASS once or more to select
Ultrabass on or off (
When activated, the ULTRABASS
indicator lights up and the display shows
.
Notes:To prevent sound interference the bass
control options operate exclusively.You cannot
combine the bass from BASS/TREBLE with
ULTRABASS.
– The display shows
to remind you if you attempt to use both bass
settings.
You can also press BASS on the remote
control to select Ultrabass on/off.
Mute
• Press MUTE on the remote control to
interrupt sound reproduction instantly.
Playback continues without sound and
display shows
activated.
• To reactivate sound reproduction or cancel
MUTE you can:
– press MUTE again;
– adjust the volume controls;
– change source;
– switch the set off.
).
or
blinking when
11