Product Use; Starting And Stopping; Lock Button - Greencut GLM1400C Manual Del Usuario

52
ASSEMBLY THE WHEELS
1. Insert the wheels into the steering axles.
2. Insert the washers and then place the locking pins through the holes in the axle, use the plastic spikes to
bend the locking pin to lock the wheel.
3. Align the holes and insert the wheel covers.
1

PRODUCT USE

ATTENTION: To avoid injury from accidental starts, always turn off the machine and disconnect it
from the power supply before moving it or making adjustments.
START UP
ATTENTION: Be sure to use an extension cable suitable for outdoor use (H05VV-F 2X0.75mm2)
attached to the power supply through a leakage protection system (RCD).
1. Connect the machine to the extension cable and then to the power supply.

STARTING AND STOPPING

1. Press and hold the safety lock button on the control box.
2. Pull the ON/OFF switch lever upwards towards the handle and hold it in this position to start the engine.
3. Release the safety lock button.
4. To stop the machine, release the ON/OFF switch lever.

Lock button

2 3
Lever ON/OFF