Conceptronic CiUSB Guía De Iniciación Rápida página 4

ENGLISH
1. Introduction
The USB Host adapter provides two USB receptacles (type A), it supports
both 12Mbps full speed and 1,5 Mbps low speed Bus transfer rates and
enables your PC to connect with USB peripheral devices which include
keyboard, mouse, joystick, digital camera and external USB HUB for USB
expansion.
1.1 Key features & specifications:
•
USB 1.0 specification
•
Compatible with Intel UHCI (Universal Host Conroller Interface) V1.1
register
•
Real Plug & Play and Hot-plugged functions
•
Provides two downstream USB ports with Root HUB function
•
Works at normal and low power mode
•
Enables power management of each port
•
Supports over-current and high-inrush current protections
•
Provides Bus fault detection and recovery
•
PCI interface specification V.2.1. compliant
•
Output voltage & current: DC 5V / 500mA
•
Limit current protect: 1250mA.
1.2 System reguirements:
•
Windows 98 or Windows 95 from OSR 2.1
•
Available PCI slot
•
IBM PC or compatible
2. Installing the card
1. Power off the PC. Plug the USB Host Adapter into one of the fee PCI
slots on your PC.
2. Turn on the PC and boot Windows OS. Windows will detect and show
new hardware as VIA VT83C572/VT82C586 PCI to USB universal
controller and prompt for installing the driver.
3. From Dialog please click Next.
4. Click to select Auto browsing driver program and click for Next.
5. Windows will autoload the USB.inf as driver.
6. Click Next to start the installation.
7. Click Finish to finish and Windows will prompt for rebooting.
8. After you have rebooted Windows, the USB ports are ready for use.
* When you unplug and plug into another PCI slot, Windows will prompt for
new hardware agina, then you need to install the driver again.
- 4 -