Kenmore 152.23151910 Manual De Uso Y Cuidado página 22

Assembly Step 16
Load gas cylinder into the cabinet through the back, positioning it against the chain between the two
cylinder supports, and then securing it by hooking together the two loose chain ends.
Connect the gas cylinder to the regulator as shown. Perform leak test (see page 23).
Use cabinet front panel for easy access to gas hose and regulator.
Note: Grease cup needs to be on the opposite side to the gas cylinder.
Regulator
Gas Cylinder
Chain
Cylinder
Supports
When connecting the flexible hose ensure that it is not subjected to twisting.
Use LP gas cylinder, max height 17.75 inches, width 12.25 inches and weight
20 lbs.
Screw regulator onto
gas cylinder.
22
12.25"