Graco Direct Connect 2M17 Manual Del Dueño página 3

Parent Unit
Unit before the unit will be ready for use.
Remove the battery door cover on the Parent
Unit with a key or flat blade screwdriver. Remove
the battery pack from the packaging and plug
into the back of the unit. Place the battery pack
into the recess and press the wire into the slot
on the side. Replace the battery door.
to remove the battery door.
battery compartment. Note the proper
orientation of the batteries.
rechargeable (ni-cadmium, etc) batteries.
A dead battery left in the unit may leak,
damaging your unit.
battery.
of time.
household current.
Unit and the back of the Nursery Unit. Then plug adapter into a standard wall outlet.
under any circumstances.
not light at all, then replace the batteries. The Parent Unit will operate if the rechargeable battery is
charged.
be changed by pressing the "ch" button on the front of the unit. The Parent Unit will
automatically scan all of the available channels until it locks on to the Nursery Unit.
If you are still experiencing interference, press the channel button on the front of the
Nursery Unit up to 6 times until a good channel is found.
by recycling.
3
Plug in cord