Test the units if you suspect they may have been damaged or have not been used for a long time.
1. If two adults are present, have one take the Parent Units to different locations, trying various volume
settings, while the other speaks into the Nursery Unit.
2. If only one adult is available, place a ticking clock, radio, or other sound-producing device near the
Nursery Unit to test it.
3. When testing, keep the level of your child's sounds in mind, and adjust the volume accordingly.
4. If there is sound interference, switch the Nursery Unit and the Parent Units to another channel
setting.
to provide a visual feedback for the volume level. The unit will beep louder or softer
depending on the volume level.
to red as your child (or other objects) make noise near the Nursery Unit. Please note
that the sound lights and volume control on the Parent Unit are independent of each
other. With the volume turned all the way down, the sound light will still illuminate
and vary in color based on sound intensity as your child (or other objects) make noise
near the Nursery Unit.
is powered on and within range of the Nursery Unit.
needs to be ON).
Unit.
1.To turn on the Vibration Alert Feature, press and release the
the low symbol
.
and the high symbol
and a third time to turn it off.
from the child unit to the parent unit is temporarily disabled.
Operation
Parent Finder Feature
will show.
button on the left
5