Brita Redi-Twist Manual Del Usuario página 10

auxiliary faucet installation
Attach tubing/fittings
to the water line/head
<< Step continued from previous page
materials and tools needed
wet ends of tubing before inserting
cut squarely on both ends
do not bend or crimp
do not cut at an angle
CONNECT END OF TUBING
AUXILIARY
FAUCET
ADAPTER
NEXT INSERT TUBING
AUXILIARY FAUCET
• Determine lengths of plastic tubing needed to connect to both inlet port to
Auxiliary Faucet Adapter and outlet port to Auxiliary Faucet.
• Cut plastic tubing squarely on both ends to length.
• Avoid extra long lengths that may create kinks in the line.
• Insert all tubing into push-to-fit connectors as illustrated.
10
Step 3
(A)
TO
AUXILIARY FAUCET ADAPTER
*
PLASTIC TUBING
(B)
INTO END OF FAUCET STEM
B
For Drop-In Filtration
System USS-120
utility knife
*
PLASTIC TUBING
A
A
SYSTEM HEAD
fittings to
purchase
Note: Tubing needed for this step is not
included in package. Use the tubing that
came with your Brita® USS-120 Filtration
System.
*
Note: For Systems with 1/4" water lines,
you will need appropriate reducers and
connectors to connect to this faucet.
THEN CONNECT OTHER END OF TUBING
(A)
TO INLET PORT ON SYSTEM HEAD
SYSTEM HEAD
(B)
FINALLY CONNECT TUBING FROM AUXILIARY
FAUCET TO OUTLET PORT ON SYSTEM HEAD
*
PLASTIC TUBING
B