Brita Redi-Twist Manual Del Usuario página 21

For Redi-Twist™ Systems USS-301
and USS-302
• Remove the Redi-Twist™ filter and inspect the
o-rings. Make sure they are in place and free
from dirt and particles.
• Install the Redi-Twist™ filter.
• Turn on the cold water supply valve and
turn on the filter faucet.
• Make sure Redi-Twist™ filter is fully into the
lock position.
• Turn off the cold water shut-off valve.
Press in the collar on the Inlet and/or Outlet
fittings. Remove tube and inspect. Repair/
replace tubing. Reconnect tubing. Ensure it
hasn't been crimped.
• Turn the cold water shut-off valve back on and
turn on the faucet for filtered water.
• Turn off the cold water shut-off valve to the
filter system.
• Locate the kitchen faucet adapter.
- If the plastic tubing is leaking,
follow the previous steps.
- If the thread between the kitchen
faucet adapter and the kitchen faucet
stem is leaking, tighten more securely. If
leaking continues, disconnect the
plastic tubing and remove the kitchen
faucet adapter. Wrap the kitchen
faucet adapter and the cold water supply
line with plumber's tape and re-install.
- Turn the cold water shut-off valve back
on and turn on the faucet for filtered
water.
Auxiliary Faucet Installation Instructions
Leaks between system
head assembly and
Redi-Twist™ filter
Leaks around fittings
Leaks on Kitchen
Faucet Adapter
connection
auxiliary faucet installation
Troubleshooting
Guide
• Turn off the cold water shut-off valve.
• Check for leaks around the compression
fitting. If leaking, check to make sure
connections are all secure.
• If leaking continues, disconnect the 3/8"
plastic tubing and try wrapping the ferrule
with plumbers tape and tighten compression
nut.
• Turn off the cold water shut-off valve to the
filter system.
• Locate the kitchen faucet adapter.
- If the plastic tubing is leaking, follow
the previous steps in "Leaks around
fittings" section.
- If the thread between the kitchen faucet
adapter and the kitchen faucet stem is
leaking, tighten more securely. If leaking
continues, disconnect the plastic tubing
and remove the kitchen faucet adapter.
Wrap the kitchen faucet adapter and
the cold water supply line with
plumber's tape and re-install.
- Turn the cold water shut-off valve back
on and turn on the faucet for filtered
water.
» If leaks continue, turn off the water supply and call
Customer Service or your local plumber.
Leaks around Auxiliary
Faucet
Leaks on Auxiliary
Faucet Adapter
connection
Version 2.0D
21