W+W 078466 Instrucciones De Montaje página 7

1.
Screw the upper part with 8x hexagon screws M12x30, washers
and self-locking nuts to the base part.The height can be adjusted.
The openings of the profiles have to face each other.
2.
The base plate of the maintenance
support has to be fixed firmly in the pit.
It can be screwed to the floor with anchor
bolts or it can be fixed at other stationary
parts of the lift in the pit.
The maintenance support has to stand
vertically below the car or the
counterweight. For a fixation on the
ground the anchor bolts must be
arranged diagonally.
3.
Connect the limit switches:
- When the maintenance support ist not fully folded, a normal operation of the lift must not be possible (switch 1)
- If persons are in the pit, the lift may only be moved with the inspection box and/or the return control, and only when
the maintenance support is completely unfolded (vertical) (switch 2).
© W+W 02.2019-Version 10
551405
Anchor bolts must be arranged
diagonally
Example:
Fixation at the piston support
7