W+W 078466 Instrucciones De Montaje página 8

Electrical data for the switch:
1. Safety disconnector IP67:
for monitoring the horizontal state of the maintenance support,
Rated operational current:
Contact:
with screw terminals
2. Position switch IP67 with positive opening operation:
for monitoring the vertical state of the maintenance support,
Rated operational current:: AC-15 3A for 230V
Contact:
with screw terminals
4.
To finish the mounting, all screw joints have to be
checked again.
Maintenance advice:
In regular intervals, but at least twice a year, the function
of the maintenance hast to be checked. Also all screw
joints have to be controlled regularly.
The responsibility for determining reasonable
maintenance intervals is incumbent on the user.
Spare parts must only be ordered from the
manufacturer. Only specialised technicians are
allowed to mount the spare parts.
Damages at or incidents with the maintenance support
have to be reported to the manufacturer without delay.
Manufacturer:
W+W Aufzugkomponenten GmbH u. Co.KG
Erkrather Straße 264-266
40233 Düsseldorf
Germany
Handling:
In the vertical position the locking mechanism must snap into place.
To fold the support the latch must be pulled.
The maintenance support must not be stressed in its folded position.
When the device is stressed by the car or the counterweight, it always has to be inspected
!
for visible damages or deformations. In case that damages or deformations are detected,
it is prohibited to enter the shaft pit with its temporarily provided space.
AC-15 4A for 230V
DC-13 4A for 24V
1NC / 1NO
DC-13 0,27A for 24V
1NC / 1NO
© W+W 02.2019-Version 10
Locking mechanism
551405
8