O P E R AT I N G I N S T RU C T I O N S
CONTROL PANEL—NON-CONVECTION MODELS
Throughout this manual, features and appearance may vary from your model.
1
2
11
OVEN CONTROL, CLOCK, AND TIMER FEATURES
1
SELF CLEAN PAD: Touch this pad to select
self-cleaning function. See the Using the
Self-Cleaning Oven section.
2
BAKE PAD: Touch this pad to select the
bake function.
3
BROIL HI/LO PAD: Touch this pad to select the
broil function.
4
DISPLAY: Shows the time of day, oven temperature,
whether the oven is in the bake, broil or self-cleaning
mode and the times set for the timer or automatic
oven operations. It will also show warming drawer
settings.
NOTE: If "F– and a number or letter" flash in the
display and the oven control signals, this indicates
a function error code.
If your oven was set for a timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when there
has been a power outage. Reset the clock.
If "Err" appears in the display, you have tried to set a
time or temperature outside of the control's limits.
Touch CLEAR/OFF pad and enter a new setting.
Touch the CLEAR/OFF pad. Allow oven to cool for
one hour. Put oven back into operation. If function
error code repeats, disconnect power to range and
call for service.
5
COOK TIME PAD: Touch this pad and then touch
the number pads to set the amount of time you want
your food to cook. The oven will shut off when the
cooking time has run out.
12
3
12
4
5
6
DELAY START PAD: Use along with COOK TIME or
SELF CLEAN pads to set the oven to start and stop
automatically at a time you set.
7
WARMING DRAWER PAD: Touch this pad and then
touch number pads 1–3 to use the warming drawer.
See the Using the Electric Warming Drawer section.
8
CLOCK PAD: Press before setting the time of day.
9
TIMER ON/OFF PAD: Press to select the timer
feature.
10
OVEN LIGHT PAD: Touch this pad to turn the oven
light on or off.
11
CLEAR/OFF PAD: Touch this pad to cancel ALL oven
operations except the clock, timer and warming
drawer settings.
12
NUMBER PADS: Use to set any function requiring
numbers such as time of day on the clock, timer,
oven temperature, internal food temperature, start
time and length of operation for timed baking and
self-cleaning.
13
START PAD: Must be touched to start any cooking or
cleaning function, and warming drawer settings.
6
7
9
10
8
13