Accessories List; Technical Parameters; Operation Instruction - Ruby VCI 1400 Manual De Instrucciones

ACCESSORIES LIST

Accessory name
Remote controller
Instruction manual
Caster with skid
Caster without skid
Caster wrench

TECHNICAL PARAMETERS

MODEL
Ratings
MAS Air Flow Consumption
MAX Water Volume
Net Weight
Measurements
Note: due to constant development of our products in regards to specification and
design, we take reservation for changes without prior notice.

OPERATION INSTRUCTION

1. Pull the unit outwards from the carton and place it on the floor.
2. Check if the accessories are complete, same as the accessories list.
3. Place the unit on the floor. Take out the wheels to assemble.
Note: Two wheels with stopper are for the two front holes and two wheels
without stopper are for the two back holes of the unit
4. Pull upwards the water tank and pull outwards about 10cm to the locking
pin, then add water.
Note: Water level must be between the MIN and MAX line.
After some time operation, dust and dirt may occur in water tank. It is
recommended to change water and clean water tank frequently.
5. Only use the unit with correct AC outlet.
6. Insert the plug pin into a wall, a small beep sound can be heard and the
power indicator will be on.
Note: To protect against electric shock, do not remove plug from wall
outlet by wet hand. Unplug from outlet while moving the unit. Insert the
plug pin into the wall socket and make sure it is connected well.
7. Press « HUMIDIFIER » button to improve the air damp, avoid skin dry and
spall in winter.
Quantity
1
1
2
2
1
RUBY VCI 1400
220~240V / 50 Hz / 130 W
3
1600 m /h
16 L
9,6 kg
386 x 356 x838 mm
14