Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Thank You For Choosing Sterling
We appreciate your commitment to Sterling value. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers are listed on the back cover.
Thanks again for choosing Sterling.
Tools and Materials
Template
Pencil
(supplied)
Tape
Scissors
Measure
Before You Begin
Observe all local plumbing and building codes.
Prior to installation, unpack the new lavatory and inspect it for
damage. Return the lavatory to its protective carton until you are
ready to install it.
Inspect the drain and supply tubing. Replace if necessary.
If possible, assemble the faucet and drain to the lavatory before
installing the lavatory.
Use the template supplied with the lavatory.
You must the cut the hole in the countertop before installing the
countertop.
For replacement installations, make sure the existing cutout is the
same size or smaller than needed for the new lavatory.
1032676-2-B
Sealant
Drill
Plus:
• 1/2" drill bit
• Rags or Paper Toweling
Jigsaw
2
Safety
Glasses
Sterling
Publicidad
Tabla de contenido
