Function "Keep Warm - ILVE HVI90TC Manual Del Usuario

 To stop the "Egg Timer"
Action
To select the "Egg Timer"
To stop the "Egg Timer"
 Setting and modification of the cooking time of a heating zone
Action
To select a heating zone
To select the power level
To select the « Timer »
Decrease the time
29,28,27,
Increase the time
increases...
The time is configured and the cooking starts until the time reaches [00].
 To stop the cooking time of a heating zone
Action
To stop the « Timer »
If several timers are activated repeat the process.
 Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound
rings and the heating zone stops.
To stop the sound and the blinking it is enough to press the timer key [ - ] or [ + ].

Function "keep warm"

This function of maintenance to the heat makes it possible to reach and maintain
automatically a temperature of 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
Start-up:
You must initially engage the cooking surface, then the zone of heating:
 To engage, to start the function " keep warm "
Action
To engage
To select the desired
heating zone
To stop
This function can be started independently on all the heating zone.
When the pan leaves the zone of cooking the "keep warm" function remains active during
approximately 10 minutes.
The maximum duration of maintenance to the heat is 2 hours.
Control panel
press once on timer key
[ - ] and [ + ] simultaneously
press on timer key [ - ]
press second time on
timer key [ - ]
Control panel
press on key [ + ]
press on key [ + ] or [ - ]
press on timer key [ - ] and [ + ]
simultaneously until the
desired heating zone.
press on timer key [ - ]
press on timer key [ + ]
Control panel
press on timer key [ + ] and [ - ]
Simultaneously until the desired
heating zone
press on timer key [ - ]
press second time on timer key [ - ]
Control panel
press "Keep Warm" key
press key [ + ] or [ - ]
press key [ + ] or [ - ]
20
Display
the time displays
displays [01]
displays [00]
Display
[4]
[1] to [9]
timer control light
from the desired
heating zone is on
[30] wents to
the time
Display
The time displays
displays [01.]
displays [00.]
Display
keep warm control light is blinking
[ U ]
[ 0 ] to [ 9 ]