Horton Polar-Extreme S Instrucciones De Servicio página 10

Para los embragues de ventilador tipo s y ht/s
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Your System Sentry
a Torx
head. The glove box Torx
®
number 994365) was designed with a 30 and
40 Torx
end. The 30 Torx
®
removal and installation of the 3/16 Allen head
System Sentry
removal and installation of the 40 Torx
Sentry
or lock-up bolts. The System Sentry
®
left hand threads.
Do not replace the System Sentry
plug. The Piston Friction Disc is balanced and
anything other than the Horton System Sentry
upset the balance and could void warranty.
6.
Install the new System Sentry
7.
Using the small brush supplied in the repair kit,
apply an even coating of spline lubricant (also
supplied in the repair kit) to both splined areas
of the Piston Friction Disc and Hub.
8.
Install the Piston Friction Disc.
9.
Replace the Face Seal and tighten the Face Seal
to 50 In. Lbs. [5.7 N•m] torque.
If the Face Seal is round (NOT HEX. SHAPE) it
is considered an obsolete part and a new Air
Chamber, with a threaded Face Seal must be used
to replace it.
10. Lubricate the new O-ring and O-ring contact
surfaces with the fresh O-ring lubricant supplied
in the kit; then, install the new O-ring into the Air
Chamber.
10
NOTE
may have an Allen head or
®
. The 40 Torx
®
NOTE
head tool (part
®
end will work in the
®
end will work in the
®
with a straight
®
.
®
System
®
has
®
will
®

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Polar-extreme ht

Tabla de contenido