Horton Polar-Extreme S Instrucciones De Servicio página 6

FAN DRIVE AND AIR CHAMBER REMOVAL
1. Verify the fan drive model and that correct
replacement parts fit this model.
2. Remove the fan drive from the engine. Lay
the fan drive assembly in a vise and clamp the
Journal Bracket tight.
3. Remove the Torx
from the Air Chamber.
Applying a small amount of air pressure to the
fan drive air inlet will aid in removal of the Air
Chamber Assembly from the fan drive.
Apply air pressure slowly so that the Air
Chamber will not pop off quickly, resulting in
serious personal injury.
4. Slide the Air Chamber Assembly off the Piston
Friction Disc.
5. Examine the inside of the Air Chamber for
signs of dirt and foreign material. The Air
Chamber should be clean and dry. If not, a
problem may exist in the vehicle air system
and must be corrected before the fan drive is
reinstalled.
6
Socket Head Cap Screws
®
NOTE