How To Assemble; Hose Installation; Attachment Installation - Royal Lexon S17 Manual Del Propietário

HOW TO ASSEMBLE

HOSE INSTALLATION/POWER NOZZLE ASSEMBLY
CAUTION- TO REDUCE THE RISK OF INJURY FROM MOVING PARTS- UNPLUG
BEFORE SERVICING.
NOTE: Please refer to Diagram 1 for the instructions below.
1. Snap together the two interlocking wands until pin locks in
place.
2. Push assembled wands into power nozzle.
3. Press cord into slots on back of wands
4. Insert handle end of hose into assembled wands.
5. Plug cord into cuff of handle.
6. Insert hose and press until it locks into place (Diagram 2).
7. Plug "hose plug" into hose plug inlet (Diagram 3).
2. 3.
Diagram 2 Diagram 3
Insert "hose plug" into hose plug
Insert hose and press until it
locks into place. inlet.

ATTACHMENT INSTALLATION

1.
1. The hose can be used alone
or with many combinations of
wands and tools.
Press the release button to
2.
open tool caddy door (Diagram
1). Attachments are stored on
board in their respective locations
(Diagram 2).
Diagram 1
Press the release button to open
door.
1.
5
4
3
3
1
3
3
2
Power Nozzle
2.
Diagram 2
Tools are stored on board under-
neath tool caddy door.
6