Filter Removal And Replacement; Storage - Royal Lexon S17 Manual Del Propietário

FILTER REMOVAL AND REPLACEMENT

EXHAUST FILTER:
CAUTION: TO REDUCE THE RISK OF INJURY FROM MOVING
PARTS - UNPLUG BEFORE SERVICING.
For filter replacement (Part # 3-RY3300-001) please call 1-800-321-1134 or visit www.royal-
vacuums.com to locate a dealer nearest you.
NOTE: The filter should be changed annually.
The Exhaust Filter is located inside the cover on the top section of cleaner.
1. Lift up on the tab of the exhaust filter.
Pull out filter and replace with new filter.
2
3. Press new filter down until it locks into place.
CHAMBER FILTER:
CAUTION: TO REDUCE THE RISK OF INJURY FROM MOVING
PARTS - UNPLUG BEFORE SERVICING.
For filter replacement (Part # 1-RY3200-000) please call 1-800-321-1134 or visit www.royal-
vacuums.com to locate a dealer nearest you.
NOTE: The filter should be changed 2 times per year.
The Bag Chamber Filter is located inside the cleaner behind the paper bag.
1. Open front cover.
2 Remove bag chamber and paper bag.
3. Slide filter cage out of chamber guides.
4. Remove old filter and replace with the new filter.
5.
Return filter cage to chamber guides and slide down until secure
in place.

STORAGE

STORAGE:
1. To turn power off, press power switch again (Diagram 1).
2. Remove plug from the wall power outlet.
3. To stow power cord in its storage place automatically, press
the cord rewind button (Diagram 1).
WARNING: HOLD PLUG WHEN REWINDING ONTO
CORD REEL. DO NOT ALLOW PLUG TO WHIP WHEN
REWINDING.
1.
Exhaust
Tab
Chamber
Filter
Diagram 1
Picture above shows locations of
the chamber and exhaust filters.
1.
ON/OFF
SWITCH
CORD REWIND
Diagram 1
To stow power cord, press the
cord rewind button.
9
Filter