Campbell Hausfeld Cl157500AV Instrucciones De Operación página 7

Clutch Mechanism Troubleshooting Guide
Symptom
Impacts slowly or
will not impact
Impacts rapidly
but will not
remove screws
Does not impact
Possible Cause(s)
1. Lack of lubrication
2. Tool regulator set in
wrong position
3. In-line regulator
or compressor
regulator set too
low
Worn clutch
mechanism
Broken clutch
mechanism
www.campbellhausfeld.com
Corrective Action
1. Lubricate air motor and clutch mechanism.
(See Lubrication section of this manual)
2. Adjust regulator on the tool to maximum
setting
3. Adjust regulators in the air system
a. Replace worn clutch mechanism
components
b. Return impact wrench to Authorized
Campbell Hausfeld Service Center for
repair
a. Replace broken clutch mechanism
components
b. Return screwdriver to an authorized
Campbell Hausfeld service center for
repair
Cl157500AV
7