Power Source; Operating The Radio; Setting The Clock - THOMSON MIC301BT Modo De Empleo

POWER SOURCE

This unit is designed to operate on a normal 230V ~ 50Hz household power supply. Do not attempt to
operate the system using other power sources. This may result in damage to the unit and void your
warranty.

OPERATING THE RADIO

A) Auto scan
1. Press the Power button
2. Set the Function button to the TUNER position.
3. Press the FM Scan [7] button on the remote control to start the AUTO SCAN function and
automatically search for radio stations for 3 minutes. The screen displays the digits and station
numbers. Once complete, the unit will store a maximum of 30 preset stations.
4. Press FOLDER +/– [4, 14] on the remote control to select the desired station.
B) Tuning
1. Press the Power button
2. Set the Function button to the TUNER position.
3. Press the SKIP for 3 seconds to automatically tune in to the next station.
4. Adjust the volume to the desired level.
5. Press the Power button
C) Storing stations in memory positions P01 to P30
1. Set the Function button to the TUNER position.
2. Press the SKIP to automatically tune in to the next station.
3. Press the MEMORY [16] button on the remote control. The current position number will flash on
the display, e.g. P01, P02, P30, etc.
4. Press Preset +/– (Folder +/–) [4, 14] on the remote control to select the station number. The
selected station number will flash.
5. Press the MEMORY button again to save. 30 radio stations can be stored in the memory.
6. Press Preset +/– (Folder +/–) [4, 14] on the remote control to select and listen to a saved station.
Antenna
Extend the wire to obtain the best reception. You may need to turn or change the position of the unit
to improve reception.

SETTING THE CLOCK

1. Press the Power button
2. Press and hold the Clock Set [20] button on the remote control for 3 seconds. Press
select the time format (12 hrs or 24 hrs) and Clock Set [20] again to confirm.
3. The hour will blink. Press
4. Press the Clock Set [20] button again: the minutes will blink. Press
Press the CLOCK SET button to finish setting the time.
to turn the unit on.
to turn the unit on.
to turn the radio off.
to turn off the unit and go to standby mode.
SKIP to set the hour.
- EN 4 -
SKIP to
SKIP to set the minutes.