Control Terminals - BONFIGLIOLI Vectron ACU-P Serie Manual Del Usuario

4.2 Control Terminals

Caution!
Switch off power supply before connecting or disconnecting the control inputs
and outputs
GB
D
1)
The control terminals are freely programmable
Release of frequency inverter: contacts at X210A.3 and X210B.2 closed.
Note!
The listed assignments of functions to control terminals corresponds to the factory
setting. The assignment of the function may be adjusted.
05/ 2014
Control terminal X210A
X210A.1
X210A.2
X210A.3
X210A.4
X210A.5
X210A.6
X210A.7
Control terminal X210B
X210B.1
X210B.2
X210B.3
X210B.4
X210B.5
X210B.6
X210B.7
Relay output X10
S3OUT
35
20VDC voltage output
(I =180mA) or Input
max
for external supply voltage
24VDC +/-10V%
Ground 20V/ Ground 24V
(ext.)
Release channel A
1)
Digital inputs
1)
Digital input
Release channel B
1)
Digital output
1)
Multi-function output
Voltage proportional to
actual frequency, factory
setting
Supply voltage +10V for
reference value
potentiometer (I = 4mA)
max
1)
Multi-function input
speed reference value
0... +10V, factory setting
Ground 10V
1)
Digital output
Quick Start Guide ACU-P