Important Safety Instructions - Luraco IMD PRO-30K Manual Del Usuario

II. IMPORTANT SAFETY INSTRUCTIONS
When using electrical equipment, basic safety precautions should always be followed to reduce the
risk of fire, electrical shock or injury.
1. Keep power cord and controller away from wet or heated surfaces.
2. This equipment should not be used by children. Read and follow all instructions before using the
equipment.
3. Lock the chuck before using the hand-piece to avoid product malfunction.
4. Do not touch the hand-piece connector with wet hands.
5. Make sure the hand-piece has completely stopped before putting it down.
6. Always turn off and unplug power to the equipment before servicing. Cleaning and maintenance
should not be done by children.
7. Do not insert any object into any openings and avoid dropping the equipment. In case the hand-
piece is dropped, check to make sure the bit is not bent and the unit does not overheat.
8. Never operate this equipment with a damaged cord or plug. If it is not working properly, if it is
dropped or damaged, or dropped into water, return the equipment to a service center for
examination and repair.
9. Wear proper protective clothes and equipment, including a dust mask and safety goggles. Keep
the workplace clean.
10. Do not disassemble or modify the unit without authorization from Luraco Technologies. Warranty
may be voided if changes are made without authorization.
After reading this user's guide, if you have any questions or comments, please call 1-800-483-9930
or contact our technical support department at support@Luraco.com or visit our website at
www.luraco.com for more information.
5