Operations; Understanding The Drill Controller - Luraco IMD PRO-30K Manual Del Usuario

III. OPERATIONS

3.1. Understanding the drill controller

1 Drill Controller
Power Connector
2
Charge LED
3
Indicator
Power Switch &
4
Speed Control
Battery LED
5
Indicator
Drill Direction Switch
6
Drill Connector
7
Side View
The Side and Front View of Drill Controller
The drill controller is the heart of the system and houses the control electronics
and the battery.
When the power cord is plugged in, the unit will charge automatically.
Illumined - Indicates the drill controller is being charged.
Off - The unit is not receiving external power.
Turn the knob counter-clockwise to the end to turn off the unit.
Turn the knob clockwise to turn on the unit and increase the speed. Turn the
knob counter-clockwise to decrease speed.
Green – Battery is good.
Flashing red and green – Drill Control shuts down due to drill overload current.
Flashing red – Battery is almost depleted.
Solid red – Battery is severely depleted and must be recharged.
Up (Forward) the spindle will rotate in the forward direction.
Down (Reverse) the spindle will rotate in the reverse direction.
Drill connects/disconnects.
6
Front View