Battery Management System; Troubleshooting Guide - Luraco IMD PRO-30K Manual Del Usuario

B) Change the drill bit
C) Lock the hand-piece chuck by turning the handle clockwise
- Always lock the hand-piece chuck before using to avoid product malfunction.
- Check the new bit for any damage before replacing.

3.5. Battery Management System

Luraco IMD Pro-30K has an onboard battery monitoring system that will monitor the Lithium-Ion battery while
the drill is in operation. In the event that the battery is completely depleted, simply plug the power cord into the
power connector on the control unit and you can continue with your work. It will charge automatically while you
are using it.
Green Light
Blinking Red
Solid Red Light

3.6. Troubleshooting Guide

Issues
Drill does not work
No charging blue light
when on base
Battery low warning
comes too often
Battery Indicator Status
The battery is in the optimal range
The battery is running low and will only provide about 1 more hour of use
The battery is critically low and should be recharged immediately
Troubleshooting
Plug in the charger
Verify that the charger is
plugged in
Let the unit charge overnight
Diagnosis/Solution
Working now: Battery was depleted
Not working: Check the hand-piece
Still not working: Call Luraco Customer Service
The battery is approaching its end of life, call
Luraco Customer Service to purchase a
replacement battery
8