Royal Catering RCZC-1030-W Manual De Instrucciones página 5

SYMBOLS
The operation manual must be reviewed.
Never dispose of electrical equipment together
with household waste.
This machine conforms to the CE declarations.
Attention! Hot surface may cause burns.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may differ
from the actual machine.
The original operation manual is in German. Other language
versions are translations from German.
I. SAFETY INSTRUCTIONS
General safety information for the use of electrical devices:
To avoid injury from fire or electric shock, please ensure
compliance with safety instructions when using this device.
Please read the instructions carefully and make sure that
you have understood them well. Keep the manual near the
equipment to be able to read it at any time. Always use
current sources connected to the ground and providing the
necessary voltage (indicated on the label on the device).
If you have any doubt, let an electrician check that your
outlet is properly grounded. Never use a damaged power
cable. Do not open the unit in damp or wet environment,
or if your hands or body are damp or wet. Protect the unit
from solar radiation. Use the device in a protected location
to avoid damaging the equipment or endangering others.
Make sure the device is able to cool and avoid placing it too
close to other devices that produce heat. Before cleaning,
disconnect it from the power source. Use a soft damp cloth
for cleaning. Avoid using detergents and make sure that no
liquid enters the unit. No internal element of this device
needs to be maintained by the user. Opening the device
without our approval leads to a loss of warranty!
II. SAFETY GUIDELINES
1. Please read these instructions carefully and
understand them before operating the device! Please
observe the safety guidelines carefully in order to
prevent damages through improper use!
2. Please keep this manual available for future reference.
If this device is passed on to third parties, the manual
must be passed on with it.
3. Only use this device indoors and for its intended use.
4. We do not offer any warranty for damages resulting
from improper use or incorrect operation.
5. Check before first use whether main voltage type
and current comply with the indicated data on the
type plate.
6. This device is not intended to be used by persons
(including children) with limited physical, sensory
or mental aptitude or lack of experience and/or
knowledge unless they are supervised by a person
8
responsible for their safety or have received
instruction from this person as to how the device
is used.
7. ELECTRICAL SHOCK HAZARD! Do not attempt
to repair the unit yourself. In case of device failures,
repair must be done by qualified experts.
8. Please check main plug and power cable regularly. If
the power cable for this device is damaged, it has
to be replaced by the manufacturer or its customer
service or another qualified person in order to
prevent hazards.
9. Prevent damages to the power cable by avoiding
squeezing, bending or rubbing it on sharp edges and
keep it away from hot surfaces and open flames.
10. ATTENTION! DANGER TO LIFE! While cleaning,
never immerse the device in water or other liquids.
11. Under no circumstances open the housing.
III. INTRODUCTION
Add sugar as the main ingredient. You can then add auxiliary
materials according to your wishes. Like that, you can
produce cotton candy of various colours and tastes. This
machine by Royal Catering allows you not only to produce
white cotton candy but also red, yellow, blue, green, orange
and purple candy floss. You can even create different
flavours like apple, strawberry, peach, water melon, lychee,
mango and many more.
IV. TECHNICAL DETAILS
Product name CANDY FLOSS MACHINE
Model RCZC-1030-W RCZK-1500S
-W
Voltage [V] 230~ 230~
Frequency [Hz] 50 50
Power [W] 1030 1500
Productivity [Sec] 1 pcs./~45sec 1pcs./~45sec
Product name CANDY FLOSS MACHINE
Model RCZK-1030-W RCZK
-1030-W-R
Voltage [V] 230~ 230~
Frequency [Hz] 50 50
Power [W] 1030 1030
Productivity [Sec] 1pcs./~45sec 1pcs./~45sec
V. SCOPE OF APPLICATION
The cotton candy machine is designed to make cotton
candy.
Any damage resulting from a non-conform use
of the device is the responsibility of the user.
Rev. 26.06.2017
VI. BEFORE FIRST USE
Upon receipt of the goods, check the packaging for
integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3
days and document the damages as detailed as possible. Do
not turn the package upside down! When transporting the
package, please ensure that it is kept horizontal and stable.
Please keep all packaging materials (cardboard, plastic tapes
and Styrofoam) so that in case of a problem, the device
can be sent back to the service centre as well-protected
as possible.
VII. DISPOSAL OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes
and Styrofoam), so that in case of a problem, the device can
be sent back to the service centre in accurate condition!
VIII. STRUCTURE OF THE MACHINE
RCZC-1030-W
1. Bowl / spinning head
1
2. Ammeter
3. Switch for heat
4. On/Off switch
5. Main socket
6. Trolley
2
3
5
4
6
RCZK-1500S-W | RCZK-1030-W | RCZK-1030-W-R
1
2
7
3
6
4
5
1. spinning head
2. bowl
3. switch for heat
4. On/Off switch
5. main socket
6. temperature adjustment knob (only for RCZK
-1500S-W)
7. display:
• For RCZK-1500S-W: voltage (V) / current ( A)/
power ( W) / energy (Wh)
• For RCZK-1030-W | RCZK-1030-W-R: ammeter
Rev. 26.06.2017
IX. BEFORE USE
1. To understand the operation of the machine please
read the manual carefully before use.
2. After unpacking the device it is of utmost importance
that you clean all of the components with cold water.
Then wipe device dry with a soft cloth.
3. Install the device on a fixed workstation.
4. Check voltage before connecting the power plug.
X. OPERATION
RCZC-1030-W / RCZK-1030-W / RCZK-1030-W-R
Pour sugar into head with spindle. Use the ON/OFF t turn
the device on, set the heating switch to „ON" and then wait
for 2 minutes. After that time the device will start making
candy floss.
After use make sure you first set the heating switch to OFF,
then wait 3-5 minutes until all of the sugar comes out of the
head and then turn the device off. Otherwise there is a risk
of the head with the spindle jamming.
WARNING! DO not overfill the head with sugar, fill it to
no more than 90% of its volume,
WARNING! Do not fill with sugar when in use. To top up
with sugar, set the heating switch to the „OFF" position
and then turn the device off using the IN/OFF switch, top
up with sugar and then start the device as described above.
RCZK-1500S-W
Pour sugar into head with spindle. Use the ON/OFF to
turn the device on, set the heating switch to „ON". Set the
heating temperature to „MAX" and once candy floss starts
appearing reduce the heating power to approx. 700-900W.
After that time the device will start making candy floss.
After use make sure you first set the heating switch to OFF,
then wait 3-5 minutes until all of the sugar comes out of the
head and then turn the device off. Otherwise there is a risk
of the head with the spindle jamming.
WARNING! DO not overfill the head with sugar, fill it to
no more than 90% of its volume,
WARNING! Do not fill with sugar when in use. To top up
with sugar, set the heating switch to the „OFF" position
and then turn the device off using the IN/OFF switch, top
up with sugar and then start the device as described above.
XI. ASSEMBLY
Trolley assembly (for RCZC-1030-W)
Screw wheels into the shorter frame then connect both
parts of the frame using cross-beams. Mount device onto
the frame and secure using 8 bolts (2 bolts per leg). Then
attach handles using 2 bolts per handle on each side of the
machine. Gently mount the bowl, align bowl handles with
the locks and then engage the locks.
9