PAJ GPS POWER FINDER Manual Del Usuario página 11

WARNING! RISK OF ELECTROCUTION!
Please note:
only by a specialist and competent person. Incorrect
installation may invalidate the operating permit.
A faulty electrical installation or an excessive mains voltage
may cause an electric shock.

Before use, adjust the mains voltage of the socket with the
information on the type plate.

Before use, make sure that the mains voltage of the socket
corresponds with the information on the type plate.

To be able to disconnect the charging cable or respectively
the cable harness from the mains as quickly as possible in
the event of a failure, connect the power supply unit where
it is easily accessible.

If you notice any visible damage to your GPS tracker or
charging cable or respectively the cable harness, do not use
it.

Use only the original parts supplied to charge the GPS
tracker. If the charging cable or respectively the cable
harness is damaged, replace it only with original
accessories from the manufacturer.

Never place the GPS tracker near an open fire or hot
surfaces.

The GPS tracker is not protected against humidity and
water. Please use and store it only in a dry environment.
Please ensure that the installation is carried out
POWER Finder 4G by PAJ GPS V.1.0 US
© PAJ GPS Inc.
Safety
11