Loading; How Do I Activate The Finder; Turning On/Off - PAJ GPS POWER FINDER Manual Del Usuario

1.3 Loading

Before first using, the GPS Tracker should be charged for
approx. 8-12 hours. Connect the supplied charging cable to the
charging port of the GPS tracker. Then attach the USB port to
the socket adapter. As soon as none of the bars on the battery
display are flashing, the FINDER is charged.
The POWER Finder 4G offers you a running time of approx.
90 days without charging! However, it should be noted that
the duration depends on the load. The more PAJ's POWER
Finder 4G is moved and the more alerts are sent, the higher
the utilization.

1.4 How do I activate the FINDER?

In order to be able to use the PAJ GPS FINDER, it is necessary to
first activate the device online.
Note: To activate the device you need the ID of your FINDER.
These can be found on the barcode stuck on the device.
Please follow
www.finder-portal.us/go
for activation.

1.5 Turning on/off

Recommended first step: To receive the best GPS signal
place the POWER Finder 4G outside and make sure it is not
covered. Avoid garages, basements and similar.
If the activation has been carried out successfully, the FINDER
can be switched on. please follow these instructions:
POWER Finder 4G by PAJ GPS V.1.0 US
© PAJ GPS Inc.
6