HAMPTON BAY 000 000 Manual De Instrucciones página 3

Step 3
Locate two locking tabs on the top
housing (4). On either side, push
the plastic wall with appropriate
force to release lens (5) from the
locking tabs. (FIG.3)
Step 4
On the underside of top housing
(4), pull off isolation strip. (FIG.4)
Step 5
Replace lens (5) to top housing
(4). (FIG.5)
Step 6
Install the light on base (1) or
(2) by inserting three locking
tabs into three slots. Twist
the light counter clockwise to
lock. (FIG.6)
Charging the battery:
For optimum performance, it is best to install the solar lights in
full sunlight and charge for 10-12 hours. Allow the light to run at
least 8-12 entire charging and discharging cycles to reach
battery's maximum capacity.
FIG. 3
FIG. 4
FIG. 5
FIG. 6
3
(4)
(5)
(4)
(4)
(5)
(1)