Horton S Instrucciones De Servicio página 6

Fan drive and air chamber removal
1. Verify the fan drive model and that correct replacement parts
fit this model.
2. Remove the fan drive from the engine. Lay the fan drive
assembly in a vise and clamp the Journal Bracket tight.
3. Remove the Torx
Chamber.
NOTE
Applying a small amount of air pressure to the fan drive air
inlet will aid in removal of the Air Chamber Assembly from the
fan drive.
Apply air pressure slowly so that the Air Chamber will not pop
off quickly, resulting in serious personal injury.
4. Slide the Air Chamber Assembly off the Piston Friction Disc.
5. Examine the inside of the Air Chamber for signs of dirt and
foreign material. The Air Chamber should be clean and dry.
If not, a problem may exist in the vehicle air system and must
be corrected before the fan drive is reinstalled.
6
Socket Head Cap Screws from the Air
®
WARNING