Notice of Installation
It can not share the same air ventilation tube with other appliance
such as gas tube, warmer tube, and hot wind tube. There will be
hazard of underpressure, combustion impaired and harmful gases
drawn back.
The bending of ventilation tube should be ≥120°,parallel or above the
start point/should be connected to the external wall.
Please make sure the installation plate is
grease collection at one end. See Fig.1.
Right
After installation, make sure that plug can be pulled out if necessary.
T he cooker hood should be plac
cooking plane for safe and a good effect. See Fig.2.
There shall be adequate ventilation of the room when the cooker
hood is working.
placed horizontally to avoid
Wrong
ed 650~750 mm up from the
EN-4
Fig.1
V.5