Mobility TAURUS Manual De Instrucciones página 38

12
5. Seat width
1. Unscrew and remove the bolts in the front and rear part of the seat
2. Adjust the width of the seat based on the holes present on the support
3. Firmly tighten the screws again
6. Seat inclination
1. Unscrew the knob (ref. I) and remove the bolt
2 Adjust the seat inclination according to need
3. Insert the bolt again and firmly tighten the knob
N.B. For safety reasons, do not drive when the seat is
inclined!
7. Backrest height
1. Detach the rear Velcro strap of the backrest
2 Unscrew and remove the backrest bolts
3. Adjust the backrest height according to need
4. Insert the bolts again and firmly tighten
5. Reattach the rear Velcro strap
8. Backrest width
1. Detach the rear Velcro strap of the backrest
2. Unscrew and remove the screws indicated in the
figure
3. Adjust the width of the backrest, choosing the size
best suited to the user
4. Insert the screws in the holes again and firmly
tighten them
5. Reattach the Velcro strap